New planar platform which increases throughput power for our planar SMT transformers by 50% over transformers of comparable size to deliver up to 800 watts of power capability.
This series lies within our family of switch mode transformers and are used for isolation and voltage conversion for switched mode power supplies in datacom and intermediate bus converter applications.
Gerard Healy, Product Manager with Pulse Electronics Power BU commented on the new release:
“Traditional planar core transformers have a non-uniform flux distribution, resulting in areas of high flux density that require additional winding turns to avoid excessive heating. Pulse has used modern finite element analysis techniques to analyze and optimize the core design to balance the flux distribution and increase the effective cross-sectional area without increasing the core size. This new platform enables us to increase the power capability of Pulse’s planar transformer portfolio and offers a significant advantage compared to using existing traditional cores.”
PH9278NL Key Features
- Power Rating: up to 800W
- Height: 18.3mm Max
- Footprint: 33.5mm x 26.8mm Max
- Frequency Range: 200kHz to 700kHz
- Isolation (Primary to Secondary): 1500VDC
- RoHS compliant and meet standard EIA481 requirements
- Patent Pending
Our new PH9278NL planar transformer is built on Pulse’s new ER25+ platform and can be customized depending on the application. The platform measures 33.5 x 26.8 x 18.3mm and delivers 50% greater power than transformers built on an ER28 platform, which measures 35.5 x 30.5 x 12.6mm. The increased power is achieved by increasing the effective cross-sectional area of the core by 40%. This results in lower core losses for a given number of winding turns. Additionally, copper losses can be reduced by removing some winding turns.
The cost-effective flat coil windings have 50% lower direct current resistance compared to multilayer PCB technology and the core design allows for a compact inter-connection and termination of the winding elements. They are available in tape-and-reel packaging.
PH9278NL Mechanicals & Schematics
Lead time is eight weeks. The price ranges from $3.75 to $4.95 for quantities up to 50,000 pieces.
Pricing varies according to order configuration and destination.