We've expanded our range of SMT round wire coil inductors to deliver higher inductance/current capability.

roundwire-coil-inductorsThe series consists of the PG0871NL, PG0702NL, PG0926NL, PH0936NL, and PG1083NL within our family of round wire coil inductors. Gerard Healy, Product Manager for Pulse Electronics Power BU explained about the new series:

“Because ferrite material is immune to thermal aging, these inductors are more reliable and better performing at higher temperatures and frequencies than non-ferrite core inductors. The properties of ferrite material are more appropriate to the typical requirement of a DC/DC converter inductor, and using round wire instead of a flat coil results in a 25% cost reduction.”

New Round Coil Inductor Features

Mechanical sizes from 7.6 x 7.4 x 6.4mm up to 21.7 x 21.5 x 12.5mm are now available with an inductance range from 0.3uH to 50uH and with a current rating up to 70A. These inductors use a ferrite core material which yields a 90% core loss reduction and 30% increase in maximum operating temperature when compared to standard iron powder material used in flat coil inductors.

  • Inductance Range: 0.47uH to 80uH
  • Sizes 8x7x6.4mm - 32x31x15.5mm
  • Low DCR Low loss ferrite material
  • No thermal aging
  • 3 pin design for improved mechanical stability
  • RoHS compliant and meet standard EIA481 requirements

An unconnected third pin at the back of the inductor distributes the part’s weight and balances the three terminals during mechanical vibration. Flattened leads serve as the pad, making the coil self-leaded. No additional base is required, further minimizing the cost.

Applications

These inductors are used as energy storage devices and filters in point-of-load (POL) regulators and as DC/DC converter output inductors for the following applications:

  • Telecom
  • Datacom
  • Server
  • Industrial

They are a lower cost alternative to flat coil inductors for applications where very low profile is not a requirement. The smaller packages are size compatible with industry-standard flat-coil inductors on the market (including the Pulse PG0426NL, PG0255NL, and PG0277NL series) commonly referred to as the 2525 series (quarter inch by quarter inch), 4040 series (0.4 x 0.4 inch) and 5050 series (0.5 x 0.5 inch) flat-coil inductors. The larger sizes satisfy the needs for emerging higher power (current) PSUs where industry standard platforms are currently lacking.

PG-roundwire-coil-inductors.chart.jpg

They are available in tape-and-reel packaging. Lead time is eight weeks. The price ranges from $0.49 to $0.99 in quantities of 50,000 pieces. Pricing varies according to order configuration and destination.


Download Datasheet | View Press Release

GET A QUOTE

Topics: Power Inductors, Product Updates, Company News, Round Wire Coil Inductors